make switch light up..
05-27-2003, 09:45 AM
#11
Regulator
Thread Starter
Join Date: Oct 2002
Location: wilmington, nc
Posts: 574
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by acuradriva
ECU? i thought you were hooking this up on your remote wire???
ECU? i thought you were hooking this up on your remote wire???
can anyone help me with me other switch (ecu)
***no battery is involved***
05-27-2003, 08:22 PM
#14
Senior Member
Join Date: May 2002
Location: mass
Posts: 160
Likes: 0
Received 0 Likes
on
0 Posts
Well that's why. The switch needs power to turn on the light, but its when power is disconnected that the ecu resets.
You can get a relay hook up pin 85 to the wire coming from the switch, pin 87a to the ecu. pin 30 to constant power and 86 to ground. Then the switch will light up when there is no power at the ecu.
You can get a relay hook up pin 85 to the wire coming from the switch, pin 87a to the ecu. pin 30 to constant power and 86 to ground. Then the switch will light up when there is no power at the ecu.
06-07-2003, 10:57 AM
#15
Regulator
Thread Starter
Join Date: Oct 2002
Location: wilmington, nc
Posts: 574
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by acuradriva
Well that's why. The switch needs power to turn on the light, but its when power is disconnected that the ecu resets.
You can get a relay hook up pin 85 to the wire coming from the switch, pin 87a to the ecu. pin 30 to constant power and 86 to ground. Then the switch will light up when there is no power at the ecu.
Well that's why. The switch needs power to turn on the light, but its when power is disconnected that the ecu resets.
You can get a relay hook up pin 85 to the wire coming from the switch, pin 87a to the ecu. pin 30 to constant power and 86 to ground. Then the switch will light up when there is no power at the ecu.
<b>85 - wire from which terminal on the switch?</b>
87a (mine only says 87) - ecu wire
86 - gound connection
30 - constant 12v power
just need a little clarification on where to connect to switch. so, there is only one wire connected to the switch?
06-07-2003, 09:19 PM
#16
Senior Member
Join Date: May 2002
Location: mass
Posts: 160
Likes: 0
Received 0 Likes
on
0 Posts
85 goes the the terminal on the switch that used to go to the ecu.
there should be an 87 a and an 87. If you hook it to 87 it will come on the opposite of when you want it to.
there should be an 87 a and an 87. If you hook it to 87 it will come on the opposite of when you want it to.