wiring help please!!
10-21-2002, 01:28 PM
#1
Member
Thread Starter
Join Date: Oct 2002
Location: Indiana at Purdue University
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
wiring help please!!
hey everyone, i used to be a member of this post back when i was in high school and i am joining again. i am an engineering student here at Purdue University. can someone give me some help and advice. right now i have a nice sony HU, 4 infinity 6.5" speakers, a RF 360.2 amp and a blown infinity perfect sub. i am thinking of replacing this sub w. an Alpine Type R 12" sub. my question is this, the sub is a DVC correct? how do I wire it to my amp in order to get the most amount of power from my amp to the sub? thanks alot, Raj.
10-21-2002, 04:24 PM
#2
Join Date: Jun 2001
Location: oakland, ca
Posts: 58,578
Likes: 0
Received 0 Likes
on
0 Posts
the RF 360.2 will give off 360 watts @ 4OHM when bridged.
there are 2 types of 12" type Rs, they both are dual VCs.
SWR-1221D are the dual 2OHM
SWR-1241D are the dual 4OHM
you want the SWR-1221D, dual 2OHM subs, if you will be running a single sub to that amp.
then from there you wire it in series to acheive a 4OHM impedance from that sub, and bridge it to that amp.
have fun.
there are 2 types of 12" type Rs, they both are dual VCs.
SWR-1221D are the dual 2OHM
SWR-1241D are the dual 4OHM
you want the SWR-1221D, dual 2OHM subs, if you will be running a single sub to that amp.
then from there you wire it in series to acheive a 4OHM impedance from that sub, and bridge it to that amp.
have fun.
__________________
.
.