94 integra rem start / security
03-18-2007, 05:25 PM
#1
Member
Thread Starter
Join Date: Jan 2007
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
94 integra rem start / security
Well, my remote start and security are currently not working. So, I plan on taking them out and was just wondering if anybody had access to some instructions / insight / help / etc :].
Thanks.
Thanks.
03-18-2007, 05:37 PM
#2
On permanent hiatus
Join Date: Jul 2004
Location: A forum with actual tech
Posts: 9,716
Likes: 0
Received 0 Likes
on
0 Posts
You will have to remove the knee bolster and reinforcement bar to get at all the wires.
Here is a wire list, so just disconnect everything from these wires and you should be good. If there were any wires cut for the installation, make sure you reconnect them.
The Helms manual is available for download in the Integra forum FAQ and should help you locate all those wires.
Here is a wire list, so just disconnect everything from these wires and you should be good. If there were any wires cut for the installation, make sure you reconnect them.
The Helms manual is available for download in the Integra forum FAQ and should help you locate all those wires.
Last edited by Däs Schmoo; 03-18-2007 at 05:40 PM.