i dont really know how this thing works but im trying to find information on how to by pass the factory "one touch" relays on my '01 accord. Im using a DEI 530T and i spliced into the wires coming out of the motor and at the switch.

 

i am not really sure, but what the problem you are having? the installation should be straight forward, just cut and splice the four wires per window.

 

hey dude sorry i didnt think anyone would reply so i didnt check back for a while. the problem im having is that my windows only go up or down 2 in. at a time. Ive messed with the resistance setings and nothing. i thought it was the one touch but its buolt into the switch so i cant by-pass it. I spliced into the thick gaugue wires that were both at the switches of each door but no luck they only go down 2 in. at a time. Do you have any experiance with the 530T? Im about to give up and call it defective.

 

play with the dip switches. that is the only advice i can give. i was thinking it was not the switches, which is should not be. just play with the switches.