steveng

i just got my kappa today. to my surprise, there are no wires come with the package. so im wondering how i install these b!tches. please show me the instructions step by step

b00gers

what dont you understand?

+ on woofer goes to + on xover for the woofer
- " " " - " " "
same with tweets.

then there should be one set of +/- left, that does to the amp.

99IntegraGS

http://www.infinitysystems.com/carau...ct_support.asp

LjN_728

Have you ever installed components before? if not, you could be looking at a very long and boring day. haha

steveng

i understand which goes to which, but i don't understand if i should use the existing wires for the woofers or not. some ppl told me yes, and some said no. so im confused.

99IntegraGS

When you say existing wires, do you mean the ones from the factory?

I just installed a component set in my Integra. I ran the "existing wires" into the crossover, then with the two set of wires coming out the other side of the crossover I ran the pair for the woofers to the woofers, and the pair meant for the tweeters to the tweeters.

steveng

yes i meant factory wires. if this is how you did urs, then that's gonna be simple enough for me...hopefully
thank you

Cashis EG8

Your factory wires will go into the input of the crossover (+ and - corresponding). Then the tweeters will connect to the high pass output on the crossover. Run a set of wires from the low pass output on the crossover to the woofer. Viola. Easy as a drunken college gerl on spring break

steveng

thanx for the tips.