how to...speakers question
i just got my kappa today. to my surprise, there are no wires come with the package. so im wondering how i install these b!tches. please show me the instructions step by step
|
what dont you understand?
+ on woofer goes to + on xover for the woofer - " " " - " " " same with tweets. then there should be one set of +/- left, that does to the amp. |
|
Have you ever installed components before? if not, you could be looking at a very long and boring day. haha
|
Originally posted by WiLL what dont you understand? + on woofer goes to + on xover for the woofer - " " " - " " " same with tweets. then there should be one set of +/- left, that does to the amp. |
When you say existing wires, do you mean the ones from the factory?
I just installed a component set in my Integra. I ran the "existing wires" into the crossover, then with the two set of wires coming out the other side of the crossover I ran the pair for the woofers to the woofers, and the pair meant for the tweeters to the tweeters. |
yes i meant factory wires. if this is how you did urs, then that's gonna be simple enough for me...hopefully
thank you |
Your factory wires will go into the input of the crossover (+ and - corresponding). Then the tweeters will connect to the high pass output on the crossover. Run a set of wires from the low pass output on the crossover to the woofer. Viola. Easy as a drunken college gerl on spring break :p
|
thanx for the tips.
|
All times are GMT -8. The time now is 10:35 AM. |
© 2024 MH Sub I, LLC dba Internet Brands