sorry for so much...we're almost done!!!

lastly, lets goto the trunk-o-funk

i started by removing the spare, etc & making it off with a frame that raised the floor
about 3.5" to give me a total of about 3.5 cu ft when done

 

then fiberglassed it in

 

then added a layer of spray-on dynamat to kill alot of vibrations

 

notice the notch so that if i have to get to the fuel pump,
i don't have to remove the whole damn enclosure :bigok:

 

here it is w/ the top finished & the diamond audio dvc 15" installed w/ the 2 port tubes

everybody sing : M-I-C-K-E-Y----M-O-U-S-E :lmfao:

 

cap & distribution

 

memphis 500d for the sub

 

memphis 75x2 for the front diamond seperates

 

ok, there you have it.

my future plans include the following

finish the trunk with panels so that when you open it, it'll look completely stock (just a little higher)
possible turbo
possible nos (the type that puts the injector in the end of the air filter)
maybe goto 18" motegi mr-7s
kyb yellows or maybe swap the eibachs for coilovers:dunno:
not much else i can think of right now

so let me know what ca think (except (98)2DrAV6 - i see you already jumped the gun!!!) :fawk: :lmfao:

peace out :wavey:

:woowoo: :blah:

 

nice

what happens if you get a flat?

and how much was the capasiter?