Spring recommend??
engiNERD
Joined: Jul 2002
Posts: 427
Likes: 0
From: ATX
I have Neuspeed sports with kyb agx's and I love them. I have a 1 finger in back and 1.5 in front for some reason. But it's not noticeble. After 3 weeks now, it dropped the front and back by 1.5" It should be 1.75 in front though(don't know why it's not) Tight turns. I would highly recommend both the sports and agx's. The lowest place for me is the mud guard in the front, 3 1/2" off the ground. But everything else is higher. Have only done some slight scraping.
Jordan ModaratOr
Joined: Mar 2002
Posts: 3,384
Likes: 0
From: bay.area
Originally posted by vtecaccord01
the pro-kit gave you a inch fender gap?? Damn
the pro-kit gave you a inch fender gap?? Damn
Sinner
Joined: May 2002
Posts: 6,599
Likes: 0
From: NoVA
Originally posted by hype8912
The difference between H&R and Neuspeed. The color of the packaging they come in. Thats the only difference. H&R makes the springs for Neuspeed.
Do a search, you will find some great information or spring and strut setup.
The difference between H&R and Neuspeed. The color of the packaging they come in. Thats the only difference. H&R makes the springs for Neuspeed.
Do a search, you will find some great information or spring and strut setup.
Sinner
Joined: May 2002
Posts: 6,599
Likes: 0
From: NoVA
Originally posted by WarptEra
eibach.com:
SPORTLINE KIT
front 1.9 in
rear 1.4 in
PRO-KIT
front 1.3 in
rear 1.2 in
I found these number were very conservative. but in anycase, if you go any lower than the prokit there are 3 things you need to worry about:
1. scrapping/rubbing/bottoming-out
2. vastly decreased shock-life (for the stock dampers)
3. you might need a camber adjustment kit/installation, which can run as much as the springs did.
-w
eibach.com:
SPORTLINE KIT
front 1.9 in
rear 1.4 in
PRO-KIT
front 1.3 in
rear 1.2 in
I found these number were very conservative. but in anycase, if you go any lower than the prokit there are 3 things you need to worry about:
1. scrapping/rubbing/bottoming-out
2. vastly decreased shock-life (for the stock dampers)
3. you might need a camber adjustment kit/installation, which can run as much as the springs did.
-w
Senior Member
Joined: Jun 2003
Posts: 108
Likes: 0
From: massachusetts
no a sportline will...pro kit is only like 1.5" drop...here's a side pic of mine...its about 1.5 finger gap all around
eibach is notorious for uneven drops. i personally wouldn't reccomend them
-w
Senior Member
Joined: May 2002
Posts: 3,049
Likes: 0
From: OH
Originally posted by WarptEra
this is the first I've heard of that, I don't think you can say they are "notorius". besides, everyone seems to think they handle the best.
-w
this is the first I've heard of that, I don't think you can say they are "notorius". besides, everyone seems to think they handle the best.
-w
never heard that before
Thread Starter
"you wanna die??"
Joined: Feb 2003
Posts: 460
Likes: 0
From: Irvine, CA
Originally posted by bruce_91zx
I have Neuspeed sports with kyb agx's and I love them. I have a 1 finger in back and 1.5 in front for some reason. But it's not noticeble. After 3 weeks now, it dropped the front and back by 1.5" It should be 1.75 in front though(don't know why it's not) Tight turns. I would highly recommend both the sports and agx's. The lowest place for me is the mud guard in the front, 3 1/2" off the ground. But everything else is higher. Have only done some slight scraping.
I have Neuspeed sports with kyb agx's and I love them. I have a 1 finger in back and 1.5 in front for some reason. But it's not noticeble. After 3 weeks now, it dropped the front and back by 1.5" It should be 1.75 in front though(don't know why it's not) Tight turns. I would highly recommend both the sports and agx's. The lowest place for me is the mud guard in the front, 3 1/2" off the ground. But everything else is higher. Have only done some slight scraping.
Senior Member
Joined: Jun 2002
Posts: 671
Likes: 0
From: Raleigh, NC
Originally posted by bruce_91zx
I have Neuspeed sports with kyb agx's and I love them. I have a 1 finger in back and 1.5 in front for some reason. But it's not noticeble. After 3 weeks now, it dropped the front and back by 1.5" It should be 1.75 in front though(don't know why it's not) Tight turns. I would highly recommend both the sports and agx's. The lowest place for me is the mud guard in the front, 3 1/2" off the ground. But everything else is higher. Have only done some slight scraping.
I have Neuspeed sports with kyb agx's and I love them. I have a 1 finger in back and 1.5 in front for some reason. But it's not noticeble. After 3 weeks now, it dropped the front and back by 1.5" It should be 1.75 in front though(don't know why it's not) Tight turns. I would highly recommend both the sports and agx's. The lowest place for me is the mud guard in the front, 3 1/2" off the ground. But everything else is higher. Have only done some slight scraping.
