b12uceHuy

Just got my H&R shock it doesnt say if its for V6 of I4 no model number either... All it says in the spring is 29 474 does anyone know what model?

I purchased H&R sport for I4 is that what i got? Just want to make sure before i put it on

I got an orange paper stating part number 51853.88 and 51858.88 blah blah about triming bumpstops.

LX4CYL

H&R Shock? Do you mean the H&R Cup Kit?

Did you get shocks, or springs? Or are they both together?

You need to be more specific.

51853-88 is the model number for the H&R RACE SPRINGS FOR 4 DOOR I4.

51858-88 is the model number for the H&R RACE SPRINGS FOR 4 DOOR V6.

H&R Race springs are different for 4drs/2drs, unlike H&R Sports, which are the same for 4drs/2drs.

http://www.hrsprings.com/site/frameapplications.html

LX4CYL

if you got H&R Sport springs for the I4, the model # would be 51853 for both 2dr/4dr. It's probably on the box somewhere.

Now that I realize it, you probably got the instruction sheet that applies to ALL 3 of H&R's springs:

OE Sport
Sport
Race

all the mumbo jumbo about 51853-88 & 51858-88 is just a side note for those installing H&R Race springs.

b12uceHuy

~THANKS LX4CYL~ 51853-88 I got the right one!

b12uceHuy

nice rims on your sig LX4CYL but you need a drop

Does any one else on this board have H&R sport on stock shocks and rims, how bad is the camber?

Anyone have tips or instructions on how to install these shocks. I have all the tools just want to get correct procedures (SAFTY) spring compresser etc...

LX4CYL

yep, I want H&R Sports + Neuspeed-Koni Shocks really bad

But I'm still confused, what exactly did you get? H&R SPORT SPRINGS?

Have purchased shocks, or springs?

Anyways, there are plenty of people here with H&R Sports, and they will all agree that you won't need a camber kit. If, for some unknown reason, you need one, it would mostly likely be a rear camber kit. But seeing how it's a 1.5/1.2 drop, it's highly unlikely.

jschmid and dreman both have H&R Sports.

If you want good instructions, a decent service manual would help. Helms manuals are good, and go for ~$70 @ helminc.com. A haynes manual is ~$20, and you could probably pick one up at your local AutoZone.

LX4CYL

51853-88???

That's the model # for H&R RACE for 4dr 4cyl!

51853 by itself is the model # for H&R SPORT for 2dr/4dr 4cyl.

check the link:
http://www.hrsprings.com/site/frameapplications.html

b12uceHuy

I got the 51853 by itself is the model # for H&R SPORT for 2dr/4dr 4cyl. I'll try to take picture and have a DIY. I'll do it next week after finals

LX4CYL

oh ok. Thought you were saying u had the -88 at the end. I envy you + your springs. damnit i want springs!