the neuspeed one is extremely solid. it comes in 2 sizes, 19mm and a race 27mm. the 27 bar can make your car too stiff though.

 

sway bar link nuts 29 ft/lbs
sway bar bracket bolts 22 ft/lbs

 

I say as tight as you can get it Strip the damn thing. Cuase when it get loose it will make a KNOCKING SOUND while you drive...

 

thanks, i put mine on today, its real nice, good deal stiffer, the car does feel like its more flat as it goes into turns and the front corner doesnt plow down as much. this mod was worth it.

 

can anyone recommend a good place to purchase the neuspeed sway bar? thank you!!

 

Why would you get Neuspeed's? I wouldn't unless if you can find one cheaper or same price of a CL-S rear sway bar. The main difference between Neuspeed's 19 mm and CL-S/TL-S 19 mm sway bar kit is that Neuspeed will give you polyurethane bushings.

My review on CL-S rear sway bar: http://www.superhonda.com/forum/show...threadid=8714. I'm surprised that many of you guys haven't heard about the CL-S rear sway bar upgrade. I wrote up that review from help I got on a fellow poster on HAN.

Nice job on the installation directions with the pictures. :thumbup: But you should include that the allen key you need is no. 5. Also, the allen key is needed to torque the endlink bolt so that it doesn't freely rotate as you try to loosen it.

 

forgive my ignorance, but what's the link for HAN? hehe i haven't visited any of these boards for too long thanx so much for the link to the review, i guess for my 4 door i would have to go with the TL-S?

 

found my answer in your link, guess the bar for CL-S and TL-S is the same, thank you, i'm gonna go grab these this weekend!!!