i used the factory bulbs they look fine . i think i am going to get hyper for the reverse , it will be alot brighter when i am backin in to my garage ... =)

 

i bought my depo fogs from procarparts on ebay.... had no probs

 

Just use your regular bulbs for the stop/reverse lights and use amber bulbs for the turn signal.

 

Hyperwhite is actually dimmer then stock.

 

I know some people say that had bad experiences with Procarparts and then some had good experineces... the reason i dont want to buy from autodynamic.com is that they are charging about $70 more for the same lights plus shipping. i mean in other words, since some people had a problem with leaky lights, what i would do in this case before i install them is to put on some silicon around the lights so the don't leak...same stuff i used to seal up my headlights when i cleared out the amber strip and i have absoutley no problems with them. I'd rather put on some silicon around them to be safe rather than spend $70 more on the same product and then who's to say those won't leak either. I mean they are aftermarket, and aftermarket is USUALLY never as good as OEM. So what do you guys recommend, keep these lights from procarparts and put on some silicon around the lights or keep the stock lights? Thanks

 

Keep it and put silicon around it.

 

i bought my dual-projector headlights from procarparts on ebay http://cgi.ebay.com/ebaymotors/ws/eB...407768409&rd=1 & i just put 'em in this evening (pics in a day or so). I also bought a Sony cd player from them on ebay & haven't had any problems.

 

I've had the red/clears from Pro Car Parts for 2 years now, no problems whatsoever.