Here's mine, its a DIY. I bought the screen off eBay for $200. It's a 6.8" LCD screen, and has a remote.

 

ahhah, i never seen that "show-time!" pic before! hot-dmZ j0!

 

Installation labor cost for those is a biotch huh?

 

Yo Sham thats hot!!! You have a step by step on that. I was talking about the same set up the other day, but i have no clue where to start.

 

I did the install myself. Zidek gave me the inspiration for it. Its a sorta fun DIY. There aren't any real step by step instructions. Basically cut out the ash tray and cigarette lighter. Then make enough room for the deck to fit into that opening. The opening for the screen is already made, you just fill it with a screen. I mounted mine (not as easy as it sounds). I also bought some tinted plexi glass ($6 custom cut) and put that infront of the screen. Right now all I have hooked up, but after my summer mods, I'll have a DVD player hooked up. The DVD player is also able to get TV signals (tv tuner capabilities). PLUS, I have two 12v video cameras coming. One for the front, and one for the back. Everything will be incorporated with the screen.

Zidek has a DIY step by step (sorta) at HS in the DIY forum, its a sticky at the top. If you have any more questions, just IM me.

 

The Clarion motor is prone to problems. I would go with Alpine.

 

Alpine is best of course

 

I do have a Clarion VRX630 in my car and a Clarion In-dash DVD player with both have detachable face.It' s been in my car for the last 8 months and I don't have any problem with it.