1998 Honda Accord 4 cyl.

I posted earlier but found out the problem. Now I seek the solution. The driver's side axle was replaced, but it did not come with the brass(?) ring around it. So now my ABS light is on. I tried to heat it up and pound it off of the original axle, but it wouldn't budge. Was the axle I bought from the auto parts store supposed to have it? Or does that ring come off? Thanks in advance.
Tom

 

if the old one wont cum off the new one should have cum with one just take it backand get the right on make sur u tell them abs

 

I got the wrong axle at the store. Luckily they will let me return it. Problem solved, other than replacing it in the Michigan winter.

 

no joke dont have a headed place to work

 

I was going to suggest returning it, otherwise it won't hurt anything besides the ABS not working if you'd have used the first one you got. The light is annoying, but I actually prefer no ABS on snow and ice, I just remove a fuse.

I hate winter too, seems the most labor intensive repairs always come up with its below freezing out

 

what is the best stand alone system fore a d16a6 if their is one

 

Autozone is letting me return it even though the boot ripped while putting it in. I think I'm gonna replace the upper and lower ball joints at the same time.