haha, nice jigga

 

Some of the pics didn't come up for me, but from what I did see, looks like you did a pretty good job. I agree with you too that a stealth install will prevent 99.9% of theft of your system. The remaining .1% it can't prevent are from people who have heard or seen what you have. This is why i'm doing a stealth install too. I just finished installing a 1/2 din Eq/line driver right under my head unit. I modified the oem drawer flap to cover the eq when im away. I'll post pics ASAP.

 

Stelth is best. I did mine in our shop when I gutted my car and changed the interior so I ran all my wires along with the factory wire harnesses. Looks nice and clean and nothing runnign under the hood and riged into the battery. just used the factory fuse box and for the amp. since I took out the factory antena I use the power sorce from it to run the amp since it turns on and off with the radio.

 

not trying to be mean...but is it realy that hard to figure out. If you look around the seat area you will see what needs to be done. And like someone previously stated, its trial and error, take some bolts out...does the seat come off? No, then look for some more solutions.,

 

aren't gonna run any 3kWatt systems with power wire from the antenna

got 1/0 ga + 4 ga running through my firewall just above the ECU on the passenger side.

I mean, what you runnin' to your amps--12 ga

 

Who said I couldn't figure it out? I hadn't even looked at it, trying to get an idea as to what all is involved. That's alright isn't it?

 

Yep thats fine........

 

cool, thanks.:fawk:

 

I read about that before. That was pretty slick. I have plans to install an AudioControl Epic-150 (so I can see when I hit the coveted 150dB mark). I was thinking of putting it in the center console compartment or on the roof somehow. Didn't really nail anything down as to where I would install it. I just know I don't want it all out in the open, though (up under the head unit).

 

How much does that back seat weigh?