Notices

90 Accord front speaker removal

Thread Tools
 
Old May 12, 2008 | 12:58 PM
  #1  
snowcrashed's Avatar
snowcrashed
Thread Starter
Junior Member
 
Joined: May 2008
Posts: 7
Likes: 0
From: Niles, MI
Default 90 Accord front speaker removal

Wanted to throw some alpines i had laying around in the Accord but im not sure how to go about this, do those big ugly speaker covers come off separate or does the whole door panel have to come off?
Reply
Old May 12, 2008 | 01:22 PM
  #2  
Cousin It's Avatar
Cousin It
Member
 
Joined: Jul 2002
Posts: 151
Likes: 0
Default

I have a 91 and the speaker covers come off separately.
Reply
Old May 15, 2008 | 12:18 PM
  #3  
wingzero210's Avatar
wingzero210
Member
 
Joined: Nov 2007
Posts: 47
Likes: 0
Default

ur going to have to take off the whole door panel

Open plastic screw cap inside door handle area using small thin screwdriver and remove screw. The cap swings from the narrow hinged side. It is easy to break. Slide handle assembly forward to release hooks. Lift out from panel slightly and release clip on linkage rod with small screwdriver. Unplug switch from assembly.

Remove plug from inside armrest cup and remove screw.

Look for plug covering screw below armrest and toward outer edge of door. Remove.

Grab lower edge of panel near speaker grill and pull outward. Continue working toward outer edge, pulling lower edge of panel.

When bottom is free, work up both sides unsnapping clips.

When all clips are loose, lift up on the panel to remove from top track.

You will need to unplug the window switches and the door light.
Reply
Old May 16, 2008 | 05:42 AM
  #4  
snowcrashed's Avatar
snowcrashed
Thread Starter
Junior Member
 
Joined: May 2008
Posts: 7
Likes: 0
From: Niles, MI
Default

Originally Posted by wingzero210
ur going to have to take off the whole door panel

Open plastic screw cap inside door handle area using small thin screwdriver and remove screw. The cap swings from the narrow hinged side. It is easy to break. Slide handle assembly forward to release hooks. Lift out from panel slightly and release clip on linkage rod with small screwdriver. Unplug switch from assembly.

Remove plug from inside armrest cup and remove screw.

Look for plug covering screw below armrest and toward outer edge of door. Remove.

Grab lower edge of panel near speaker grill and pull outward. Continue working toward outer edge, pulling lower edge of panel.

When bottom is free, work up both sides unsnapping clips.

When all clips are loose, lift up on the panel to remove from top track.

You will need to unplug the window switches and the door light.
Beautiful! I think im going to order some replacement door handles and fix that while im at it if they already need to come off.
Reply




All times are GMT -8. The time now is 05:30 PM.