Originally Posted by wingzero210

ur going to have to take off the whole door panel

Open plastic screw cap inside door handle area using small thin screwdriver and remove screw. The cap swings from the narrow hinged side. It is easy to break. Slide handle assembly forward to release hooks. Lift out from panel slightly and release clip on linkage rod with small screwdriver. Unplug switch from assembly.

Remove plug from inside armrest cup and remove screw.

Look for plug covering screw below armrest and toward outer edge of door. Remove.

Grab lower edge of panel near speaker grill and pull outward. Continue working toward outer edge, pulling lower edge of panel.

When bottom is free, work up both sides unsnapping clips.

When all clips are loose, lift up on the panel to remove from top track.

You will need to unplug the window switches and the door light.