alright so i have searched all over for help with this. i understand the basics and that this is very simple, however i am not good with wiring diagrams nor do i have a clue what im lookin in a wiring harness.

i have a 92 accord as stated above what would be a good 12v to tap into and how would i go about doing it? also if anyone could provide pics with there install i would greatly appreciate it! also what wire would the green one off the shift light go into on h22 dizzy? thanks,92h

 

it'll be the white wire comin out of ur iginition harness (i'm pretty sure its white)

to find out which wire it is, plug a tester in to each wire and the one that gets 12 volts when the key is in "on" position, is the one u need to use.

how many wires coming out of the shift light?

i think the green is for ur tach, it'll go to the one of the wires coming out of ur distributor. there's a plug w/ two wire coming out of it (forgot what color they're), but its one of them and u can test around w/ each one. it wont hurt the system. (plug in the green/tach wire to each one to test and see if the tach on the shift light works, ur motor will have to be running)