Notices

battery wont hold charge...

Thread Tools
 
Old Sep 20, 2007 | 06:14 PM
  #1  
sjl2484's Avatar
sjl2484
Thread Starter
Junior Member
 
Joined: Sep 2007
Posts: 9
Likes: 0
Default battery wont hold charge...

I was driving the other day and my car started to act up and then it died while i was driving. I replaced the battery and the altenator and the battery wont hold a charge and the new alt was only putting out 12.5 volts. Went back to autozone and swapped altenator and my battery still wont hold charge and alt not putting out proper voltage. had new alt tested before i installed it and it was good. Anyone with any ideas. Honda said it is possibly a wiring issue...
Reply
Old Sep 20, 2007 | 07:15 PM
  #2  
HanmeSAL's Avatar
HanmeSAL
Junior Member
 
Joined: Sep 2007
Posts: 12
Likes: 0
Default

check your belts also.
Reply
Old Sep 21, 2007 | 03:09 PM
  #3  
sjl2484's Avatar
sjl2484
Thread Starter
Junior Member
 
Joined: Sep 2007
Posts: 9
Likes: 0
Default

belts are only a couple of months old. still in good shape
Reply
Old Sep 21, 2007 | 06:14 PM
  #4  
HanmeSAL's Avatar
HanmeSAL
Junior Member
 
Joined: Sep 2007
Posts: 12
Likes: 0
Default

how old is your vehicle?
If you have voltmeter, check the voltage on the battery and start the car.
it should jump up to around 13.5v. If it's not, it's not charging. Or if not, it could just be corrosion on connection.
take it to autoshop, would help a lot if someone actually take a look under the hood.

Last edited by HanmeSAL; Sep 21, 2007 at 06:16 PM.
Reply
Old Sep 21, 2007 | 08:09 PM
  #5  
v6_accord_jerz's Avatar
v6_accord_jerz
Stupid Power Ball
 
Joined: Jun 2006
Posts: 11,619
Likes: 0
From: Dirty Jersey
Default

Could be due to a faulty alternator. Have it checked.
Reply
Old Sep 21, 2007 | 08:52 PM
  #6  
sjl2484's Avatar
sjl2484
Thread Starter
Junior Member
 
Joined: Sep 2007
Posts: 9
Likes: 0
Default

i have put two altenators in it....the altenator now tested good before i put it in...i think it is a wiring issue because the altenator is not putting out...
Reply
Old Sep 24, 2007 | 12:55 PM
  #7  
sjl2484's Avatar
sjl2484
Thread Starter
Junior Member
 
Joined: Sep 2007
Posts: 9
Likes: 0
Default

found the problem....was a 15 amp ecu fuse...hope that works...
Reply
Old Sep 24, 2007 | 01:24 PM
  #8  
tatvamasi_12's Avatar
tatvamasi_12
Junior Member
 
Joined: Jun 2007
Posts: 3
Likes: 0
Default

Hey man, see the belt tension. if you keep it loose or keep it too tight these kind of things happen.
Reply




All times are GMT -8. The time now is 04:29 PM.