Actually there is a site that will solder for you. A guy names Nate runs the ledautomotive.com website and he only charges a very modest fee. He'll solder just about anything you want. The catch is that you have to send in your part you want soldered and of course buy the bulbs from him.

 

I'm looking to replace the map light bulbs and the dome light bulb with a white LED from the website that was just listed. I have no clue which bulbs to buy? Anyone know the type I should get? BTW it's for a 94 Teg.

 

1994 ACURA Integra (Coupe)

Low beam headlamp
9006
High beam headlamp
9005
Parking light
1157
Front turn signal
1157
Rear turn signal
1156
Tail light
1157
Stop light
1157
High mount stop light
921
License plate
168
Back up light
1156
Front sidemarker
168
Rear sidemarker
168
Map light
DE3022
Dome light
DE3022
Trunk/Cargo area
DE3021


Now just find a LED that'll replace those stock bulb numbers

 

Sweet thanks, where'd you find that little bit of info?

 

Just go here and type in the info of your car:

http://www.sylvania.com/ConsumerProd...lacementGuide/

 

Yea after READING on the website, I found it. h:

 

Do those super bright LEDs work okay as turn signal lamps in an Accord, or is that a no-go?

 

yup but are you talking about the turn signal indicator lamps inside the car or outside?....either way you'll you'll need a pair of wedge LED's, on the inside i left mine green though since i did the blue conversion on my cluster i didn't "everything" blue.....i thought about making it white or red though

 

www.ledautomotive.com sells some bulbs which you don't need to solder