5th gen washer camber kit???
#2
Older Honda Fanatic
Join Date: Jul 2002
Location: Adirondacks of NY
Posts: 3,154
Likes: 0
Received 0 Likes
on
0 Posts
only for the rear... use them where the upper control arm mounts to the wheel well, very simple and effective. If the car is lowered a lot, you will need longer bolts as well, be sure to use at least grade 8 bolts for strength.
more washers = more camber correction
more washers = more camber correction
#4
Banned
Thread Starter
Join Date: Feb 2006
Location: MA.
Posts: 792
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SumAccordGuy94
only for the rear... use them where the upper control arm mounts to the wheel well, very simple and effective. If the car is lowered a lot, you will need longer bolts as well, be sure to use at least grade 8 bolts for strength.
more washers = more camber correction
more washers = more camber correction
#5
Originally Posted by wedley2
yea, i have a 2 inch drop for my rear on my cb7 and two washers have corrected most of it
#6
bboy Wesley West
Join Date: Oct 2003
Location: six-five-o
Posts: 15,390
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by dleccord
and you are still using the same bolt? anyone know the bolt size or ring size for correction? dont want to take mines off at pepboys just to measure.