Notices

HID headlight ballast

Thread Tools
 
Old Jun 21, 2006 | 05:34 AM
  #1  
flyromeo3's Avatar
flyromeo3
Thread Starter
 
Joined: Jan 2004
Posts: 6,692
Likes: 0
From: Bethlehem PA
Default HID headlight ballast

hey guys. Last night when i went to turn on my headlights i noticed only one headlight turns on.
LEft side works
Right side doesnt

When I turn the headlights on you could see the right headlight kind of goes on for about 2 seconds then turns off.
I guess the bulb is good and the ballast may of gone bad.
Would ya'll agree with that?
Reply
Old Jun 21, 2006 | 05:46 AM
  #2  
e3NiNe's Avatar
e3NiNe
#CustomUserTitle
 
Joined: Mar 2002
Posts: 63,855
Likes: 1
From: glass case of emotion
Default

hard to say.

what kind of HID setup are you using? 9006 kit or a retrofit?
Reply
Old Jun 21, 2006 | 05:49 AM
  #3  
flyromeo3's Avatar
flyromeo3
Thread Starter
 
Joined: Jan 2004
Posts: 6,692
Likes: 0
From: Bethlehem PA
Default

9006 kit

hella ballasts.

I remember in my VW i had that problem also but i dont remember if i replaced the bulb or the ballast.

shit, I might as well buy a new kit. What do you guys think of McCulloch kit?

i found this. if its my ballast that needs replacement I could just get one.

http://cgi.ebay.com/ebaymotors/X5-Ba...spagenameZWDVW

Last edited by flyromeo3; Jun 21, 2006 at 05:51 AM.
Reply
Old Jun 21, 2006 | 05:55 AM
  #4  
e3NiNe's Avatar
e3NiNe
#CustomUserTitle
 
Joined: Mar 2002
Posts: 63,855
Likes: 1
From: glass case of emotion
Default

Do you hear the ballast ignite? Have a friend turn your lights on for you, you should hear a "zap" coming from the units.

I'd take the bad side's bulb and plug it into the good ballast. See if the bulb lights up, if not, you have a bulb issue.
Reply
Old Jun 21, 2006 | 07:11 AM
  #5  
flyromeo3's Avatar
flyromeo3
Thread Starter
 
Joined: Jan 2004
Posts: 6,692
Likes: 0
From: Bethlehem PA
Default

Originally Posted by e3NiNe
Do you hear the ballast ignite? Have a friend turn your lights on for you, you should hear a "zap" coming from the units.

I'd take the bad side's bulb and plug it into the good ballast. See if the bulb lights up, if not, you have a bulb issue.
I havent tried that.
It looks like it starts it but it just doesnt stay on.
I guess the starter put in the ballast works but something else might not.
Thats why I think the bulb does work.

Ill try to use my left side bulb and see if it works.

Thanks

Last edited by flyromeo3; Jun 21, 2006 at 07:24 AM.
Reply
Old Jun 21, 2006 | 07:41 AM
  #6  
flyromeo3's Avatar
flyromeo3
Thread Starter
 
Joined: Jan 2004
Posts: 6,692
Likes: 0
From: Bethlehem PA
Default

now if I replace one ballast with the one I linked up above would one headlight be brighter than the other? Assuming i dont have any problems with the bulbs.
Reply
Old Jun 21, 2006 | 07:46 AM
  #7  
Misa's Avatar
Misa
Pic Whore
 
Joined: Jul 2004
Posts: 22,224
Likes: 1
From: NJ
Default

did you use a harness?

swap the right ballast to the left side, if it doesnt work, then the ballast is toast

swap the right bulb to the left side, if it doesnt work, then the bulb is toast
Reply
Old Jun 21, 2006 | 07:54 AM
  #8  
flyromeo3's Avatar
flyromeo3
Thread Starter
 
Joined: Jan 2004
Posts: 6,692
Likes: 0
From: Bethlehem PA
Default

Originally Posted by Jani
did you use a harness?

swap the right ballast to the left side, if it doesnt work, then the ballast is toast

swap the right bulb to the left side, if it doesnt work, then the bulb is toast

ill try that later on.

Does it matter if the ballast is different? would it make the bulb a different color?
Reply
Old Jun 21, 2006 | 07:57 AM
  #9  
Misa's Avatar
Misa
Pic Whore
 
Joined: Jul 2004
Posts: 22,224
Likes: 1
From: NJ
Default

a ballast is a ballast is a ballast.


color temp is bulb specific.

if you need a replacement, stick with hella, phillips, matsushita, or any other oem brand
Reply
Old Jun 21, 2006 | 08:29 AM
  #10  
flyromeo3's Avatar
flyromeo3
Thread Starter
 
Joined: Jan 2004
Posts: 6,692
Likes: 0
From: Bethlehem PA
Default

Originally Posted by Jani
a ballast is a ballast is a ballast.


color temp is bulb specific.

if you need a replacement, stick with hella, phillips, matsushita, or any other oem brand
i just bought the one that i linked above.
Ill use that until im able to get just one hella ballast
Reply



All times are GMT -8. The time now is 03:54 PM.