Notices

97 accord CEL. P0715. WTF?

Thread Tools
 
Old May 26, 2006 | 09:55 AM
  #1  
TonyBoneKhang's Avatar
TonyBoneKhang
Thread Starter
Junior Member
 
Joined: Sep 2005
Posts: 14
Likes: 0
Default 97 accord CEL. P0715. WTF?

My dad's 97 accord (4 Cyl, VTEC) threw an error code last month and I just took it into autozone to get scanned. They said it brought up error code P0715 "inlet turbine". What the hell is that? They say it may just be an ecu glitch and I'm resetting the ecu now but what could have caused this?

Not sure if resetting the ecu will clear it but I'll update once I get it started back up.
Reply
Old May 26, 2006 | 10:46 AM
  #2  
flyromeo3's Avatar
flyromeo3
 
Joined: Jan 2004
Posts: 6,692
Likes: 0
From: Bethlehem PA
Default

check the turbo. It could be the flux capacitor is causing the fan not to spin.

Reply
Old May 26, 2006 | 11:06 AM
  #3  
totalimmortal's Avatar
totalimmortal
MalleusMaleficarum
 
Joined: Sep 2005
Posts: 3,668
Likes: 0
From: Asheville, NC
Default

Reset it, that flux capacitor acts up sometimes.

It's most likely a fluke. An "inlet turbine" is the turbine inside the compressor housing of a turbo.

Last edited by totalimmortal; May 26, 2006 at 11:09 AM.
Reply
Old Jul 7, 2006 | 06:44 AM
  #4  
strykernyc's Avatar
strykernyc
Senior Member
 
Joined: Apr 2003
Posts: 3,339
Likes: 1
From: new york city
Default

yo did u get this fix? I just got the same code and i have same car just 96.



Originally Posted by TonyBoneKhang
My dad's 97 accord (4 Cyl, VTEC) threw an error code last month and I just took it into autozone to get scanned. They said it brought up error code P0715 "inlet turbine". What the hell is that? They say it may just be an ecu glitch and I'm resetting the ecu now but what could have caused this?

Not sure if resetting the ecu will clear it but I'll update once I get it started back up.
Reply
Old Jul 7, 2006 | 10:33 AM
  #5  
bighavic's Avatar
bighavic
Member
 
Joined: Sep 2004
Posts: 51
Likes: 0
From: Bethlehem,PA
Default

"P0715" Input/Turbine Speed Sensor Circuit Malfunction. Speed Sensor Ciruit Malfunction is for the speed sensor (Transmissoin) not for a turbo besides the fact that the accord does not come tubroed..
Reply
Old Jul 7, 2006 | 12:41 PM
  #6  
totalimmortal's Avatar
totalimmortal
MalleusMaleficarum
 
Joined: Sep 2005
Posts: 3,668
Likes: 0
From: Asheville, NC
Default

Originally Posted by bighavic
...besides the fact that the accord does not come tubroed..
Ya think so???
Reply
Old Jul 7, 2006 | 02:28 PM
  #7  
SumAccordGuy94's Avatar
SumAccordGuy94
Older Honda Fanatic
 
Joined: Jul 2002
Posts: 3,154
Likes: 0
From: Adirondacks of NY
Default

Its the main shaft speed sensor in the transmission, NOT the vehicle speed sensor.
Reply
Old Jul 9, 2006 | 06:47 AM
  #8  
strykernyc's Avatar
strykernyc
Senior Member
 
Joined: Apr 2003
Posts: 3,339
Likes: 1
From: new york city
Default

yup it was the main shaft speed sensor. I replace it and is working fine now.
Reply




All times are GMT -8. The time now is 04:34 PM.