Honda-Acura.net

Honda-Acura.net (https://www.honda-acura.net/forums/index.php)
-   Accord (https://www.honda-acura.net/forums/accord-5/)
-   -   97 accord CEL. P0715. WTF? (https://www.honda-acura.net/forums/accord/237152-97-accord-cel-p0715-wtf.html)

TonyBoneKhang 05-26-2006 09:55 AM

97 accord CEL. P0715. WTF?
 
My dad's 97 accord (4 Cyl, VTEC) threw an error code last month and I just took it into autozone to get scanned. They said it brought up error code P0715 "inlet turbine". What the hell is that? They say it may just be an ecu glitch and I'm resetting the ecu now but what could have caused this?

Not sure if resetting the ecu will clear it but I'll update once I get it started back up.

flyromeo3 05-26-2006 10:46 AM

check the turbo. It could be the flux capacitor is causing the fan not to spin.

:rolleyes: :D

totalimmortal 05-26-2006 11:06 AM

Reset it, that flux capacitor acts up sometimes.;)

It's most likely a fluke. An "inlet turbine" is the turbine inside the compressor housing of a turbo.

strykernyc 07-07-2006 06:44 AM

yo did u get this fix? I just got the same code and i have same car just 96.




Originally Posted by TonyBoneKhang
My dad's 97 accord (4 Cyl, VTEC) threw an error code last month and I just took it into autozone to get scanned. They said it brought up error code P0715 "inlet turbine". What the hell is that? They say it may just be an ecu glitch and I'm resetting the ecu now but what could have caused this?

Not sure if resetting the ecu will clear it but I'll update once I get it started back up.


bighavic 07-07-2006 10:33 AM

"P0715" Input/Turbine Speed Sensor Circuit Malfunction. Speed Sensor Ciruit Malfunction is for the speed sensor (Transmissoin) not for a turbo besides the fact that the accord does not come tubroed..

totalimmortal 07-07-2006 12:41 PM


Originally Posted by bighavic
...besides the fact that the accord does not come tubroed..

Ya think so???

SumAccordGuy94 07-07-2006 02:28 PM

Its the main shaft speed sensor in the transmission, NOT the vehicle speed sensor.

strykernyc 07-09-2006 06:47 AM

yup it was the main shaft speed sensor. I replace it and is working fine now.


All times are GMT -8. The time now is 04:43 AM.


© 2024 MH Sub I, LLC dba Internet Brands