leaking from around the torque converter splash shield it leaks lots when the engine is running but when u switch it off it slows down?does this mean the t/c is leaking?is there any perticular way to install it ? im stumped,either need a new t/c or new tranny? any input would be great....

 

Show us some pictures or some diagrams of where it's coming from. Most likely you just need a new gasket or seal somewhere.

 

hello,after another long day taking the tranny back out we found that the o ring that is on the end of torque converter was in 2,so tomorrow i`ll be going to honda and getting a new 1,also im gonna get a new seal that goes in the gearbox its self to be on the safe side and while the tranny is out:cheers:

also out of intrest,how much atf do i need to fill up the gearbox cause a heck of alot came out:dunno:

 

Per user's manual:
3.2 liter (3.4 US qt, 2.8 lmp qt)
Honda Premium Formula Automatic Transmission Fluid or an Equivalent DEXRON II type ATF