radio freq? this is starting to sound like more work then i ever imagined

 

I mean the radio stations you have programmed on the preset buttons, you dont realy have to do that it and you can alway set them again. The code is something you will need cause when you disconnect the battery, you will have to enter the code in the radio or it wont work after you connect the battery.

 

yeah, that code is a must. its a five digit code. when you connect the battery again, the clock/radio display will ask you for a code. punch in that 5 digit code, and presto, your good to go. its not that much work. its just your gonna have to reprogram your stations and set the clock again.

 

well i can't start on it this weekend, because i have to get ready for a trip for work. But before i start cutting the wire. Does the angel eye lights connect to the blinker wire or headlight wire?

 

dont connect it to the headlight. thats what i meant above. cut the blinker. but the blinker wire is gonna have 3 wires. one is for the ground, one is for your turn signal, and the last one is for the regular orange light (the one that turns on the first click when turning on your headlights) you want to connect the angel eye wires to that wire, so when you click your headlights on once, the angel eyes will come on with the orange lights. if you connect it to the turn signal, your angel eye lights are gonna blink everytime you put your turn signal. do you understand. so like i said before, cut some insullation off the wire and wrap the end of the angel eye wire to the exposed part of the other wire where you cut the insullation. you will also have to do this to the groud wire. hope i didnt confuse you.

 

if you did it right, this is what it will look like, except you got two angel eye lights that will turn on.