Notices

How to change Tranny Fluid?

Thread Tools
 
Old Sep 27, 2005 | 06:42 AM
  #1  
RBailie81's Avatar
RBailie81
Thread Starter
Registered User
 
Joined: Sep 2005
Posts: 162
Likes: 0
From: Kansas City
Default How to change Tranny Fluid?

Ok, I'm going to change the transmission fluid in my 01 accord, I've checked some of the posts but can't find great instructions. I need to know what all is involved. I know the whole drain and drive and drain and drive procedure but I've never done stuff like this before. Usually take it to a shop but I'm low on $$$. I will use Honda ATF from the dealer. Do I need to lift my car at all, or can I reach the plug and sit a pan underneath my car? Anything else I should know or do while I'm doing this? I'm also checking my PCV valve while I'm in there.
Reply
Old Sep 27, 2005 | 07:07 AM
  #2  
Powerplating's Avatar
Powerplating
Plating Guru
 
Joined: Sep 2005
Posts: 28
Likes: 0
Default

just tried to help
Reply
Old Sep 27, 2005 | 07:09 AM
  #3  
RBailie81's Avatar
RBailie81
Thread Starter
Registered User
 
Joined: Sep 2005
Posts: 162
Likes: 0
From: Kansas City
Default

I thought you are not supposed to flush the trannies in Hondas.
Reply
Old Sep 27, 2005 | 07:12 AM
  #4  
Powerplating's Avatar
Powerplating
Plating Guru
 
Joined: Sep 2005
Posts: 28
Likes: 0
Default

[QUOTE=RBailie81]I thought you are not supposed to flush the trannies in
Reply
Old Sep 27, 2005 | 07:13 AM
  #5  
Powerplating's Avatar
Powerplating
Plating Guru
 
Joined: Sep 2005
Posts: 28
Likes: 0
Default

.................................................. ...
Reply
Old Sep 27, 2005 | 08:14 AM
  #6  
RBailie81's Avatar
RBailie81
Thread Starter
Registered User
 
Joined: Sep 2005
Posts: 162
Likes: 0
From: Kansas City
Default

Originally Posted by Powerplating
Because there is no changeable filter these trans do have to be flushed

I've been told by several people not to do a flush on these transmissions. Does anyone know how much Honda ATF to buy, if I have to fill and drain a few times?
Reply
Old Sep 27, 2005 | 09:20 AM
  #7  
wedley2's Avatar
wedley2
bboy Wesley West
 
Joined: Oct 2003
Posts: 15,390
Likes: 0
From: six-five-o
Default

dont do the flush, just fill and drain.
Reply
Old Sep 27, 2005 | 10:18 AM
  #8  
RBailie81's Avatar
RBailie81
Thread Starter
Registered User
 
Joined: Sep 2005
Posts: 162
Likes: 0
From: Kansas City
Default

Originally Posted by Powerplating
Because there is no changeable filter these trans do have to be flushed
Where does the Fluid drain? I just looked at my engine and cant find the plug.
Reply
Old Sep 27, 2005 | 11:11 AM
  #9  
JL95AccorD's Avatar
JL95AccorD
Senior Member
 
Joined: Jan 2005
Posts: 662
Likes: 0
From: Miami, FL
Default

Thats because it drains from the tranny, not the engine. And yes, drain and fill, never flush.
Reply
Old Sep 27, 2005 | 01:05 PM
  #10  
Powerplating's Avatar
Powerplating
Plating Guru
 
Joined: Sep 2005
Posts: 28
Likes: 0
Default

.........................
Reply



All times are GMT -8. The time now is 08:47 PM.