Notices

idle jumping PLEASE HELP

Thread Tools
 
Old Mar 15, 2005 | 02:30 PM
  #11  
VPUPPY's Avatar
VPUPPY
Senior Member
 
Joined: Nov 2002
Posts: 1,975
Likes: 0
From: Orlando, FL
Default

i would say check the fast idle thermo valve again, and make sure everything that needs to be connected to it is. the fast idle thermo valve uses coolant temperature to regulate the idle on your car, so make sure the coolant lines are connected and that your cooling system is full and air free.
Reply
Old Mar 17, 2005 | 10:53 AM
  #12  
dgilling's Avatar
dgilling
Thread Starter
Registered User
 
Joined: Dec 2004
Posts: 6
Likes: 0
Default

Well my car has been at the honda shop for two full days now and they still cant figure it out. Does anybody know if it would hurt my car to bypass the IACV. Because when I do the car runs good it just doesn't have a cold start function. Would it cause any damage. Also if it is possible what is the best way?
Reply
Old Mar 19, 2005 | 11:37 AM
  #13  
99Accolude's Avatar
99Accolude
heavy cars Rule!
 
Joined: Jun 2003
Posts: 322
Likes: 0
From: Brooklyn ny
Default

Originally Posted by dgilling
Well my car has been at the honda shop for two full days now and they still cant figure it out. Does anybody know if it would hurt my car to bypass the IACV. Because when I do the car runs good it just doesn't have a cold start function. Would it cause any damage. Also if it is possible what is the best way?
how do you bypass the iacv?? please tell i have same problem with h22 99 accord.
Reply
Old Mar 20, 2005 | 01:07 AM
  #14  
midnitekid19's Avatar
midnitekid19
Registered User
 
Joined: Apr 2003
Posts: 1
Likes: 0
Default vacuum hose might be the problem

My ride had the same thing going on. i have a 91 accord with a f20a engine. same thing, basically... anyways, it would rev high and low in park constantly until i drove off. the honda folks here checked it out and said that it was a vacuum hose that had collapsed. i'm not sure where it was, but if i remember right, it was in the back of the block. now my ride is working again... might wanna check it out. hope it helps... good luck.
Reply
Old Mar 21, 2005 | 04:43 PM
  #15  
preludesitdrive's Avatar
preludesitdrive
Registered User
 
Joined: Jan 2005
Posts: 18
Likes: 0
Default

i had this problem and it was because the coolant was low. try checking that out
Reply
Old Mar 22, 2005 | 02:37 PM
  #16  
LowH22Accord's Avatar
LowH22Accord
Registered User
 
Joined: Mar 2005
Posts: 4
Likes: 0
Default

Originally Posted by MarcD
The only other items the Helm manual show to check is the fuel injectors and the Map sensor. Is the engine light coming on?
yes the light comes on and when its on its running like crap but then it will cut off and it will run great, V tec will kix in and everything...ahhhhh it kills me
Reply
Old Mar 23, 2005 | 11:14 AM
  #17  
MarcD's Avatar
MarcD
Member
 
Joined: Apr 2004
Posts: 32
Likes: 0
Default

Have you tried to extract the codes yet on the computer?
Reply




All times are GMT -8. The time now is 04:47 PM.