Fitting BodyKit
#1
Registered User
Thread Starter
Join Date: Sep 2003
Location: Minnesota
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
Fitting BodyKit
I just received my R33 kit and everything seems to line up except the back bumper muffler hole is off. Is there an easy way to refit my muffler to this hole. It seems to be covering the left side of the muffler by an inch or two. Also any suggestions on painting it myself. Is it easy to do?
#2
Moderator Alumni
Join Date: Feb 2004
Location: North America
Posts: 1,128
Likes: 0
Received 0 Likes
on
0 Posts
You can try to bend the muffler hangers yourself. If that doesn't work, an exhaust shop can cut off the old hangers and weld on some new ones to line up the muffler in the right spot.
Don't try painting the parts yourself. Take them to a professional so the paint can be matched and sprayed correctly.
Don't try painting the parts yourself. Take them to a professional so the paint can be matched and sprayed correctly.
__________________
2005 s2000
2005 s2000
#3
cb7 fanatic
Join Date: Oct 2003
Location: Gulfport MS
Posts: 927
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by shivers
You can try to bend the muffler hangers yourself. If that doesn't work, an exhaust shop can cut off the old hangers and weld on some new ones to line up the muffler in the right spot.
Don't try painting the parts yourself. Take them to a professional so the paint can be matched and sprayed correctly.
Don't try painting the parts yourself. Take them to a professional so the paint can be matched and sprayed correctly.
Thread
Thread Starter
Forum
Replies
Last Post
crucial Si
Parts Classifieds
5
07-21-2002 01:35 PM