Notices

Silencing the Accord V6?

Thread Tools
 
Old Dec 6, 2003 | 07:09 AM
  #1  
01ACCORD's Avatar
01ACCORD
Thread Starter
Senior Member
 
Joined: Aug 2002
Posts: 306
Likes: 0
From: Virginia
Default Silencing the Accord V6?

I am in the process of silencing my Tundra to give me better stereo sound. I am using a combination of a product called Brown Bread (almost identical to Dynamat but a little thicker, and a LOT cheaper) and some acoustic foam. Photos here:

http://www.gwfweb.com/tundra

The question is, besides the door panels, where would my ’01 v6 benefit the most from this? Rear deck I’m sure. I don’t have subs, so what about the trunk area?

Anyone else done this?
Reply
Old Dec 6, 2003 | 08:51 AM
  #2  
VRGNCD5's Avatar
VRGNCD5
cause it's tight!
 
Joined: Jun 2002
Posts: 8,044
Likes: 0
From: 916
Default

door panels, floorboards, trunk, rear deck and roof(if it vibrates)
Reply
Old Dec 6, 2003 | 12:58 PM
  #3  
uclaccord's Avatar
uclaccord
Senior Member
 
Joined: Jun 2003
Posts: 831
Likes: 0
Default

where'd u get brownbread and how d'u put it on
Reply
Old Dec 6, 2003 | 01:19 PM
  #4  
01ACCORD's Avatar
01ACCORD
Thread Starter
Senior Member
 
Joined: Aug 2002
Posts: 306
Likes: 0
From: Virginia
Default

Originally posted by uclaccord
where'd u get brownbread and how d'u put it on
Brown Bread can be purchased at: http://www.b-quiet.com/brownbread.html

The acoustic foam panel can be purchased at: http://www.amistorefront.com

The BB is self adhesive. Peal and stick. And once it's stuck, it's STUCK! You have to scrape it off.

The foam is applied with a spray adhesive I purchased from the same company and it works great.

A little tip. Put a heavy coat of wax and don't wipe it off where you want to remove the BB. Makes it easy to cut holes and then just peal it off.
Reply




All times are GMT -8. The time now is 01:08 PM.