Originally posted by kenn22civic01
The engine stopped after 3 secs because your unit can not detect whether the engine has started or not so it redo the cycle. I solve this problem is by using sparkplug sense ( review your unit's manual for this feature.) Basically you would wrap a wire around the sparkplug wires. When the engine starts, the current running in the sparkplug wire will induce a voltage at your loop wire and "alert" the unit. Hope this helps
yeah same problem here, i tried every method possible to get the tach pickup to work...and never could. i just wrapped a wire around one of the plug wires right at the distributor...worked perfectly first try.
make sure you set the crimestopper alarm brain to sense via sparksense, not tach.