View Single Post
Old Jun 11, 2003 | 06:35 PM
  #6  
superdelsol's Avatar
superdelsol
Junior Member
 
Joined: Jun 2003
Posts: 2
Likes: 0
Default 3.0

been there done that or lets say doing that. I have a 95 delsol si and i used a 99 accord v6 for a donor. It will fit but you have to cut your radiator support to make room for the new bigger radiator it it will get warm. all of the front end has to be remove and replaced with the accords. i used the subframe spidles, rotors lower control arms cv joints off of the accord. struts are about the same but i changed them too. I had to change upper control arms to skunk work camber kits and my camber is still off about 1in and to fix it i have to redrill the towers and cut interfender well (unibody not platic) for more clearance. Tranny sucks, auto is not the way to go if your going to do it you should go with the cl manual tranny. I plan on swapping it in soon.
Reply