OMF! My engine>update
Registered User
Joined: Jul 2003
Posts: 283
Likes: 0
From: Toronto, Canada
Originally posted by westcoaststyle
I aim to please.
I don't have any experience with using the civic harnesses because I had to go from OBD1 to OBD2 on the motor and I had a harness with the engine.
I aim to please.
I don't have any experience with using the civic harnesses because I had to go from OBD1 to OBD2 on the motor and I had a harness with the engine.
Thread Starter
Just another import lover
Joined: Jun 2003
Posts: 481
Likes: 0
From: NB, Canada
Well I went out today on my lunch break to check on things. 
First of all I couldn't get my hands on a digi cam today so I don't have a pic of that dam wire for you westcoast...sorry 
but I was very happy to find that the wiring harness was complete. He also found out the positioning for the plug. It plugs into the intake manifold and was very hard to see. Oh well at least that problem is solved.
The rear mount and gasket for the intake manifold are on their way also..... woohoo!!! Should be hear on Wednesday. I will keep you updated guys!
First of all I couldn't get my hands on a digi cam today so I don't have a pic of that dam wire for you westcoast...sorry but I was very happy to find that the wiring harness was complete. He also found out the positioning for the plug. It plugs into the intake manifold and was very hard to see. Oh well at least that problem is solved. The rear mount and gasket for the intake manifold are on their way also..... woohoo!!!
Should be hear on Wednesday. I will keep you updated guys!
Thread Starter
Just another import lover
Joined: Jun 2003
Posts: 481
Likes: 0
From: NB, Canada
h: one more day and the swap should be complete. Wiring is done. now we have to put the rear mount in, attach the intake and the exaust manifolds, attach the b-pipe to the cat 2.5">2.1/4":dunno: and put my sway bars on. :thumbup: I'm too excited to breathe
Now if everything goes according to plan I will be doing a little of this..... :bowdown: :rockon: :drunk: :boink:
pics soon as promised
matt
Thread Starter
Just another import lover
Joined: Jun 2003
Posts: 481
Likes: 0
From: NB, Canada
update.
engine is almost complete. We attached the exaust manifold, shift linkage, power steering pump (not fun...I will explain), front sway bar, driverside lower motor mount, and did some cosmedic work(paint some parts)
power steering pump hose needed to be modified in order to hook up to the Type R pump. We had to weld a connector on.....
It worked very well
Tomorrow the rear mount and intake gasket will be here. Then the wiring and some other minor details have to be worked out then we are set.....hehe....I simply can't wait I will have some finishing pics soon guys!! Thanks for all the help you guys threw my way
http://www.cardomain.com/member_page...=308665&page=2
hope this link works!
engine is almost complete. We attached the exaust manifold, shift linkage, power steering pump (not fun...I will explain), front sway bar, driverside lower motor mount, and did some cosmedic work(paint some parts)
power steering pump hose needed to be modified in order to hook up to the Type R pump. We had to weld a connector on.....
It worked very well
Tomorrow the rear mount and intake gasket will be here. Then the wiring and some other minor details have to be worked out then we are set.....hehe....I simply can't wait
I will have some finishing pics soon guys!! Thanks for all the help you guys threw my way http://www.cardomain.com/member_page...=308665&page=2
hope this link works!
Thread Starter
Just another import lover
Joined: Jun 2003
Posts: 481
Likes: 0
From: NB, Canada
thanks dude...ya I know I've been crucified for my lights
thats just my D16y8 engine coming out right now. I will have some pics of the B16B R going in and complete hopefully tomorrow.
thats just my D16y8 engine coming out right now. I will have some pics of the B16B R going in and complete hopefully tomorrow.
:barf: