crank pulley defeat :(
#11
I've seen it done one or two ways. The first time I saw it done was a breaker bar on the socket, a 6ft long bar on the breaker bar and two dudes standing on the long bar. The car almost came off the lift.
I got lucky with an impact. Gotta go back and fourth and of course making sure the compressor is at its max pressure. Loosen for 3 seconds, tighten for 3 seconds. Go back and fourth until you hear the nut whiz off.
I got lucky with an impact. Gotta go back and fourth and of course making sure the compressor is at its max pressure. Loosen for 3 seconds, tighten for 3 seconds. Go back and fourth until you hear the nut whiz off.
#12
So OG it hurts.
Thread Starter
Join Date: Mar 1999
Location: VA
Posts: 6,592
Likes: 0
Received 0 Likes
on
0 Posts
i was using the moroso crank pulley tool to keep the motor from spinning.
hopefully i'll get it done soon.
hopefully i'll get it done soon.
#14
So OG it hurts.
Thread Starter
Join Date: Mar 1999
Location: VA
Posts: 6,592
Likes: 0
Received 0 Likes
on
0 Posts
N1 pulley is ON, and so is the AEM alternator pulley.
my friend made quick work of it
all it cost me was buying him a beer.
knocked it out in like 30 mins.
my friend made quick work of it
all it cost me was buying him a beer.
knocked it out in like 30 mins.