OK Two questions.....
I talk Before I think
Joined: Sep 2002
Posts: 1,388
Likes: 0
From: eugene. OR
Originally posted by Slacker
Are you positive it is bigger than mine? Theres only 34 minutes left in that auction... I will buy it right now if you are sure?
Are you positive it is bigger than mine? Theres only 34 minutes left in that auction... I will buy it right now if you are sure?
Thread Starter
Senior Member
Joined: Jun 2002
Posts: 867
Likes: 0
From: Stratford, CT
Originally posted by crucial Si-T
you should change the fuel pump and fuel line.
you should change the fuel pump and fuel line.
Banned
Joined: Mar 2002
Posts: 8,220
Likes: 0
Originally posted by Slacker
OK... this an easy thing to do myself? Or not necessarily easy, but is it something I can do myself. I just did the alternator, so in comparison to that?
OK... this an easy thing to do myself? Or not necessarily easy, but is it something I can do myself. I just did the alternator, so in comparison to that?
easy?
Thread Starter
Senior Member
Joined: Jun 2002
Posts: 867
Likes: 0
From: Stratford, CT
Originally posted by crucial Si-T
take out back seat, take out screws, take out pump, change pump, do reverse.
easy?
take out back seat, take out screws, take out pump, change pump, do reverse.
easy?
Sounds like a cake walk to me. And smoke cigs heavily during the entire process.. right?
I talk Before I think
Joined: Sep 2002
Posts: 1,388
Likes: 0
From: eugene. OR
Still here... sorta...
Joined: Sep 2000
Posts: 17,177
Likes: 2
From: CO
I had the same problem with the hesitation, but it was fixed when I changed the fuel line from the filter to the rail.
I do now have a BBK/Walbro fuel pump (255lph) and that helped out a lot too.
I do now have a BBK/Walbro fuel pump (255lph) and that helped out a lot too.
Thread Starter
Senior Member
Joined: Jun 2002
Posts: 867
Likes: 0
From: Stratford, CT
Originally posted by westcoaststyle
oh, and as for the pump, I have a DIY, but I haven't typed it all up yet....
oh, and as for the pump, I have a DIY, but I haven't typed it all up yet....
Which should I do? Aftermarket? Or stock SI? And whats the approximate going price for either?