Originally posted by babylon28
What the hell? I'm not a ricer!
I have done nothing to my car, other than nice metallic interior kit, and these lights.
I think it looks sharp.
Here is my ride...
I just want to put the dang lights on! lol

Originally posted by WideBodyEK
what the hell guys,...the guy is asking for help on how to install his taillights,...just because you dont like his style doesnt mean you cant help the guy out,...the whole purpose of this board is to help people learn about their cars and to help them do things themselves,...i especially like the comment " i would help you but i hate euro tails" i dont like the altezzas either but if i knew how to do it on 7th gens,..i would atleast answer is question

anyways man,..if i knew more about 7th gen civics i would help you out,..but i havent worked on very many and especially not 4drs,..sorry

Originally posted by WideBodyEK
what the hell guys,...the guy is asking for help on how to install his taillights,...just because you dont like his style doesnt mean you cant help the guy out,...the whole purpose of this board is to help people learn about their cars and to help them do things themselves,...i especially like the comment " i would help you but i hate euro tails" i dont like the altezzas either but if i knew how to do it on 7th gens,..i would atleast answer is question

anyways man,..if i knew more about 7th gen civics i would help you out,..but i havent worked on very many and especially not 4drs,..sorry

The inner lights are real easy to take off; 1 nut in the middle and 2 others on the ends. Thats it.
The outer lights are harder. Heres how to take them off.

1. Remove 2 plastic clips from the bottom of bumper.

2. Remove 2 screws (4 total) on each side of the bumper, right behind the tires.

3. Open your trunk. On each side near the trunk lining you'll see 2 taps you can pop out.
There are 2 bolts to take off.

4. You should be able to take off your bumper now. Don't worry about using some force it's all held on by clips now.

5. Below the tail lights, you'll see brackets attached to the car with 2 bolts on each bracket. Take them off.

6. Now on to the inside of the trunk. You have to pull back the material thats preventing access to the lights. Before you can do that you'll need to unscrew the 2-3 clips that hold it in place.

7. Now you should be able to pull it back and you'll see that the outer lights are held on by 3 nuts.

8. Remove the brackets from the stock lights (1 screw each) and put them on the new lights. Some people didn't do it when they put theirs on. So I guess this could be an optional step.

9. You should now be able to just reverse the instructions so put everything back together.

For siliconing or waterproofing, go buy some clear drying chaulk at your hardware store and use as needed.

Originally posted by crucial Si-T
SHO is that way-------->

Originally posted by westcoaststyle
The equal opportunity modder. :fawk:


jfwy man

Originally posted by WideBodyEK
what can i say,...im a ricer hfawk:

Originally posted by westcoaststyle
h:

Like I said, car looks good now... but that is, in fact, just my opinion.