rolling thy fenders
I did it exactly the way that link did...
Still rub... but it's not the fender's now... :huh:
Still rub... but it's not the fender's now... :huh:
__________________
9Y0 Cayenne GTS
E46 ///M3
YD4 MDX - SOLD
EG Ferio - SOLD
FA Ferio - Returned
www.NelsonLee.net
9Y0 Cayenne GTS
E46 ///M3
YD4 MDX - SOLD
EG Ferio - SOLD
FA Ferio - Returned
www.NelsonLee.net
I pushed in the tabs on the inside. Gave it a little pressure and bent it in. So far...so good.
__________________
[ASIANDOOOD.COM] [INSPIRE USA] [FACEBOOK] [ENDLESS 8]
F/S: JDM EG9 Parts - PM me for info
[ASIANDOOOD.COM] [INSPIRE USA] [FACEBOOK] [ENDLESS 8]
F/S: JDM EG9 Parts - PM me for info
Originally posted by asiandoood
I found this...but Im chicken shit. Knowing me...I'll roll the whole damn fender panel
h:
http://www.andrews.edu/~johnsonm/howto/rollfender.html
I found this...but Im chicken shit. Knowing me...I'll roll the whole damn fender panel
h:http://www.andrews.edu/~johnsonm/howto/rollfender.html
LOL!!!!!!! louisville slugger pwns!!!!:thumbup:
Originally posted by EddieK
LOL!!!!!!! louisville slugger pwns!!!!:thumbup:
LOL!!!!!!! louisville slugger pwns!!!!:thumbup:
__________________
Sponsored by: KAM Racing Sports, Falken Tires, Progress Technology, Brady's High Performance, Taggart Performance Engineering, Rotora Brakes
Autocross is: 90% driver, 5% car, & 5% CRAZY MOJO!
Autocross Help Page
Sponsored by: KAM Racing Sports, Falken Tires, Progress Technology, Brady's High Performance, Taggart Performance Engineering, Rotora Brakes
Autocross is: 90% driver, 5% car, & 5% CRAZY MOJO!
Autocross Help Page
Actually, there IS a propper way. Most professional shops use a special tool (similar to the one tire rack rents I think) that attaches to the hub, then you spin it while it pushes the fender up.
__________________
9Y0 Cayenne GTS
E46 ///M3
YD4 MDX - SOLD
EG Ferio - SOLD
FA Ferio - Returned
www.NelsonLee.net
9Y0 Cayenne GTS
E46 ///M3
YD4 MDX - SOLD
EG Ferio - SOLD
FA Ferio - Returned
www.NelsonLee.net


