so I finally found some time, and my buddy and I gave it all a go. We got the front coilovers and shocks in no problem. The camber looked like a b**ch and I didnt know what to do with the ball joint. We got the rear passenger side completely done (coils, shocks and camber) and on the other rear side i stripped the bolt that goes thru the bottom of the shock so since I had to send it to my local shop and I had them do that rear side and the camber in the front, then brought it to a guy in Manchester and got an alignment (only 40 bucks:thumbup: ).

Here are some pics (I just put em in a yahoo folder cause i dont know how to link em)
http://photos.yahoo.com/bc/zimzimma1...My+car&.view=t

Got about a 1.5 finger (or 1 if you got stubby fingers:fawk: ) all the way around.

(and yes the decals says SOHC VTEC, I have an EX)

Im gonna order rims anyday now, most likely gonna rock the gunmetal....any opinions on which ones?

The rocks are at a slight angle so that close up of the front tire is a lil bit off
EDIT:
try this instead
click on my car

 

can't get to the pics.