Head Unit Problems
2 Problems Here
First my keyless entry is acting up, and it's connected to the stock head unit, i have an aftermarket unit, but the stock one is still mounted behind for the keyless, now my keyless entry doesn't work and i need to be able to get back to it.
First - i can't seem to get the panel out to get to the area behind my head unit and i removed the two screws, but i can't get past that part
Second - i need to now how to reset the remote and headunit to synchronize up the keyless entry
thanx, sorry it's long and yes i looked in the haynes manual first
First my keyless entry is acting up, and it's connected to the stock head unit, i have an aftermarket unit, but the stock one is still mounted behind for the keyless, now my keyless entry doesn't work and i need to be able to get back to it.
First - i can't seem to get the panel out to get to the area behind my head unit and i removed the two screws, but i can't get past that part
Second - i need to now how to reset the remote and headunit to synchronize up the keyless entry
thanx, sorry it's long and yes i looked in the haynes manual first
first, check the fuse for it. i dont remember if that one is in the car or under the hood. if not, make sure one of the wires in the split harness didnt come loose. third, there is a "reset" button on the front of the stock head unit between a couple of the buttons on it. i dont remeber how to reprogram, but just call your honda dealer and ask their service dept. explain the situation and they're probably gonna tell you how to reset/reprogram the circuit. could be a bump made your stock reciever think that you were trying to steal it, and now it doesnt function, and you have to enter the code for it.
ummm
screws *thinking back* gotta remove all 3 pieces of the center console.(start w/ the screws at the back, and work forward....6 screws total i think, then each piece lifts out) then the front part lifts up. i'll look in the morning
screws *thinking back* gotta remove all 3 pieces of the center console.(start w/ the screws at the back, and work forward....6 screws total i think, then each piece lifts out) then the front part lifts up. i'll look in the morning


