ecu harness help

Reply Subscribe

Thread Tools

Mar 7, 2003 | 08:22 PM

etmoron

Thread Starter

Moron Member

Joined: Jun 2002

Posts: 241

Likes: 0

From: new york city

ecu harness help

going to buy a 94 ls motor soon but was told the engine harness is cut , what harness can i use now ?? any b18a/b ???

Mar 7, 2003 | 09:32 PM

dantastic

cx power!

Joined: Jun 2002

Posts: 2,435

Likes: 0

From: berkeley, ca --> la, ca representin' tha 510&626

into what car? if you have a 5th gen, you can reuse the stock civic harness

Mar 8, 2003 | 07:45 AM

etmoron

Thread Starter

Moron Member

Joined: Jun 2002

Posts: 241

Likes: 0

From: new york city

i have a 5th gen civic si. so basically i can reuse the stock si harness ? but what about all the vtec wires and stuff ? im a big noOb to all this wire stuff.

Mar 8, 2003 | 07:49 AM

96extec

Senior Member

Joined: Oct 2002

Posts: 278

Likes: 0

From: connecticut

The ls engine is not vtec, so you will not use them, you will prob have to ground them so you dont throw a ecu code, good luck

Mar 8, 2003 | 08:17 AM

westcoaststyle

Still here... sorta...

Joined: Sep 2000

Posts: 17,177

Likes: 2

From: CO

You just need the LS engine harness. And you can just remove the VTEC and VTEC oil pressure wires from the ECU by taking them out of the back of the ECU plug. Simple.

Mar 8, 2003 | 01:56 PM

etmoron

Thread Starter

Moron Member

Joined: Jun 2002

Posts: 241

Likes: 0

From: new york city

so basically i can just use the original and and take out the vtec stuff in the harness ?

Mar 8, 2003 | 02:45 PM

westcoaststyle

Still here... sorta...

Joined: Sep 2000

Posts: 17,177

Likes: 2

From: CO

Quote:

Originally posted by westcoaststyle
You just need the LS engine harness. And you can just remove the VTEC and VTEC oil pressure wires from the ECU by taking them out of the back of the ECU plug. Simple.

That's what I said.