Notices

Suspension Techniques rear swaybar on EK

Old Mar 4, 2003 | 06:47 AM
  #1  
vizeta's Avatar
vizeta
Thread Starter
Junior Member
 
Joined: May 2002
Posts: 17
Likes: 0
Default Suspension Techniques rear swaybar on EK

Hi, I just bought a used Suspension Techniques rear swaybar for my 98 EX coupe. It doesn't come with installation manual. Anybody has detailed pictures or how-to which i can c online? Thanks.
Reply
Old Mar 4, 2003 | 09:39 AM
  #2  
kornycivic's Avatar
kornycivic
Member
 
Joined: Jun 2002
Posts: 84
Likes: 0
From: Albuquerque New Mexico (yes it's in the US!)
Default I had the same problem

I had the exact same problem, i'm actually currently waiting for them to mail me the manual and parts list (so I can make sure I have all the parts :-) You'll need to call Suspension Tech directly (it's hard to find there number :-) but I'll give it to ya! (took me 2 weeks to find it! :-) It's 1-800-595-7016 just tell them what you need and they'll hook you up...when I called they even had a hot sounding chick that knew all about the install :-) i guess you have to rotate the struts 180 degrees to make room for the bracket and some other thigns too...any way, they seem to be really helpfull, just hard to track down :-)

Good luck!
Ben
Reply
Old Mar 4, 2003 | 09:54 AM
  #3  
Brad's Avatar
Brad
wooo nascar!
 
Joined: May 2002
Posts: 7,959
Likes: 0
From: baltimore
Default

it wasnt that hard.. me and my buddy did it in a couple hours on a saturday



i remember a while back a guy had a how-to on his web page for the sus tech rear sway..

http://www.home.mpinet.net/t-hero/SwayBar!!.htm

i dunno if it works anymore, but it was good.
Reply
Old Mar 4, 2003 | 10:06 AM
  #4  
vizeta's Avatar
vizeta
Thread Starter
Junior Member
 
Joined: May 2002
Posts: 17
Likes: 0
Default

Thx everybody. by somebody's help in honda-tech.com. I got a good online reference. http://www.overboost.com/story.asp?id=445
hope it helps. =)
Reply
Old Mar 4, 2003 | 10:07 AM
  #5  
vizeta's Avatar
vizeta
Thread Starter
Junior Member
 
Joined: May 2002
Posts: 17
Likes: 0
Default

i just hate to drill on my subframe. any other way to work around?
Reply
Old Mar 4, 2003 | 11:42 AM
  #6  
Brad's Avatar
Brad
wooo nascar!
 
Joined: May 2002
Posts: 7,959
Likes: 0
From: baltimore
Default

you don't have much choice about drilling into your subframe that i know of.. its not too bad.
Reply
Old Mar 4, 2003 | 12:23 PM
  #7  
supapoopa's Avatar
supapoopa
Nissan: Shift_Recall
 
Joined: Aug 2002
Posts: 1,671
Likes: 0
From: Bay Area, CA
Default

Originally posted by hotgin20
Hot girls sucking cocks and loving it - Only at Blowqueen !! Best of all ... its FREE for 1 day !! Click Here: http://www.blowqueen.com/1261795520

who the fuk is this guy? :madfawk:



is post count = this message in other threads.

all the threads.
Reply
Old Mar 4, 2003 | 12:48 PM
  #8  
vizeta's Avatar
vizeta
Thread Starter
Junior Member
 
Joined: May 2002
Posts: 17
Likes: 0
Default

RiceBurninVTEC, your setup looks nice. Did u apply any plates or washers inside the subframe for D-brackets? I'm going to use some washers, do u think it's strong enough?
Reply
Old Mar 4, 2003 | 08:14 PM
  #9  
CPL's Avatar
CPL
Senior Member
 
Joined: May 2002
Posts: 734
Likes: 0
From: Bay Area.
Default

I think the shop installed my rear sway bar wrong.

Does anyone have this problem?? The bottom bolt securing the shock to the arm is poking into the bushing of the bar. You think the shop installed it backwords?
Reply
Old Mar 4, 2003 | 11:37 PM
  #10  
tokyoracer's Avatar
tokyoracer
got JDM milk???
 
Joined: Jun 2002
Posts: 991
Likes: 0
Default

Originally posted by vizeta
RiceBurninVTEC, your setup looks nice. Did u apply any plates or washers inside the subframe for D-brackets? I'm going to use some washers, do u think it's strong enough?
if you want it to be stronger... u might want to pick up some mugen reinforement plates... my friend had it on his hatch and after 2 days of hard runs at laguna seca... it was still nice and tight. btw, he got the cusco 22mm rear sway.
Reply


All times are GMT -8. The time now is 08:06 PM.