ok my little D series turbo whores....
Thread Starter
Joined: Jul 2003
Posts: 28,282
Likes: 0
From: michigan
If your only wanting to do about 250hp you can rock some DSM 450 injectors and find a resistor box for cheap or just wire in resistors inline. dsmtalk.com is a great place to find said injectors. I would personnaly consider getting some tunertoys injectors there pretty cheap and you give your self the capability for when you want more (and with a built block your going to lol)
2gr84u
Joined: Mar 2004
Posts: 3,690
Likes: 0
From: VIRGINIA
no I have not used them, personnaly, my old build used precision injectors. They are pretty good company in my experience though and im sure will stand behind there product, Speaking of which, they mistakenly sent me this
http://tunertoys.zoovy.com/c=sVXnN5W...nes_turbo.html
when i ordered there map adapter, they sent me the map adapter but didnt ask for the water port thing back, do you want it for your build?
http://tunertoys.zoovy.com/c=sVXnN5W...nes_turbo.html
when i ordered there map adapter, they sent me the map adapter but didnt ask for the water port thing back, do you want it for your build?
Your Powder Coater
Joined: Mar 2004
Posts: 4,463
Likes: 0
From: Girard, Ohio
do not buy tuner toys branded injectors. i've personally seen them fail, multiple times on eric's car.
Stick with either the dsm 450's if your below 300whp or just suck it up & go with RC or Precision.
Stick with either the dsm 450's if your below 300whp or just suck it up & go with RC or Precision.
