Notices

SRS Light On - MES Connector

Thread Tools
 
Old Jul 7, 2008 | 02:39 AM
  #1  
randomtask77's Avatar
randomtask77
Thread Starter
Wanderer
 
Joined: Aug 2000
Posts: 10,793
Likes: 0
From: Not so Sunny Cali
Default SRS Light On - MES Connector

I'm really hoping that somebody could chime in and help me out here, but could anybody tell me where the location of the MES connector is on a 93 civic coupe?

For the life of me, I could not find the MES connector in my car. I've read all the DIY threads on countless honda forums (including this one) and I know the process of how to reset it. But all of the pictures or instructions seem to indicate that the MES connector is by the fuse panel under the dash.

Mine is nowhere to be found. At least not by the fuse panel. I've read that the connector on older civics might be on the passenger side to the right of the glove box. I did see some wiring there, but none that match what is supposed to look like the MES connector (I'm looking for a plug that looks like the speaker wire used in the DIY here on HAN).

I don't want to just cover up the light with tape, or just pop out the bulb to the SRS indicator, I actually want to resolve this the correct way (but not cost me a lot to do it). I just need actual confirmation of what the connector looks like and where it's located (color of wiring would help tremendously).

Any help would be greatly appreciated.
Reply
Old Jul 7, 2008 | 07:01 AM
  #2  
Bakeoff's Avatar
Bakeoff
wooooo woooooooooo
 
Joined: Mar 2002
Posts: 3,134
Likes: 0
From: Twin Cities
Default

It's been ages for me, but I remember it being the other plug down by the ecu that is plugged into that green cover, like the plug to check your CEL codes...
Reply
Old Jul 7, 2008 | 08:34 AM
  #3  
randomtask77's Avatar
randomtask77
Thread Starter
Wanderer
 
Joined: Aug 2000
Posts: 10,793
Likes: 0
From: Not so Sunny Cali
Default

Originally Posted by Bakeoff
It's been ages for me, but I remember it being the other plug down by the ecu that is plugged into that green cover, like the plug to check your CEL codes...
Is it by the ECU, where I have to take off part of the carpeting, or directly under the glove box?

I found some wiring under the glove, it had a grey connector and a brown connector.

I haven't had a chance to check by the ECU.
Reply
Old Jul 8, 2008 | 04:57 PM
  #4  
thetunersource's Avatar
thetunersource
Senior Member
 
Joined: Mar 2008
Posts: 235
Likes: 0
From: Costa Mesa, CA
Default

its near the ECU i thought
Reply




All times are GMT -8. The time now is 06:47 PM.