Look at all the space for activities!

 

I think i know somebody who can do alignments.....

 

we need alignment and corner balance. lookin' curry's in Sterling.

 

Ah ok. Hey now i know someone local when i decide to change up my suspension.

 

what were the running issues?

 

Odd vibration through a certain section of the RPM range.
Brakes need more bleeding (didn't have enough Motul RBF 600 to keep bleeding).
Ebrake cables aren't reaching properly. It broke apart from the ebrake handle a little after we got the car running.
We need to corner balance and align the car before we can start getting it really road worthy. Just depends on when my friend has time to get it done.

Once that is done. We'll move forward.

What is the proper ebrake cable to use for this 4 wheel disc brake conversion?

 

eg coupe/hatch should use 2-door integra e-brake cables.

 

or just use the Si setup, no real need for integra parts. civic parts seem to be cheaper, even though both sill serve the same purpose

 

Then I'm using the right cables. They're just not lined up or something.

 

just make sure they are from an Si coupe or suggested above, integra coupe

could also be they are adjusted on the cable to be too tight and therefore too short to reach


if you can provide a few pictures, that would be cool