aftermarket headlight installation
12-21-2007, 06:06 PM
#1
Junior Member
Thread Starter
Join Date: Dec 2007
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
aftermarket headlight installation
Hi folks, just purchased online, might add got a good deal,what's new. Would like to know if anyone has done this replacment and what all do I have to remove to complete the job.
It's a 2002 civic LX 2dr
I see where there are 2 bolts below on the H/L and am wondering if I will have to remove the bumper and or the wheel wells to get at them. Also, the H/L has the angle eyes 2 in each H/L so there is 2 wires extending from the unit which I suppose should be connected to the parking light wire for power?
Thanks in advance for the help!
It's a 2002 civic LX 2dr
I see where there are 2 bolts below on the H/L and am wondering if I will have to remove the bumper and or the wheel wells to get at them. Also, the H/L has the angle eyes 2 in each H/L so there is 2 wires extending from the unit which I suppose should be connected to the parking light wire for power?
Thanks in advance for the help!
12-22-2007, 12:23 PM
#3
You connect the halo's to the parking lights. I just want to say that the lights you're going to put in the car are going to be worse than your stock headlamps in usable light output. Also the halo's will dim and/or blow or flicker with time.