Here are SOME pix of my Hatch

 

I'm diggin' the old school rims. Any engine work?

 

What does it look like under the sub? I'm still wanting to do that project. I have a 1000 watt sub and the amp, but have yet to do it. Is that a piece of plywood and you just let it hang? I'm thinking fiberglass enclosure.
Power window swap?? I did that to mine too.

Clean

 

damn i luv those little cars lol
i wanna get one. looks smooth thought.

 

my sub is made into my spare tire space, I used 2x2 and made a frame then glued it down around the spare tire space with liquid nail... let it cure for 24 hrs. then filled the gaps with expanding foam (dries in 4 hours), the only place I didn't seal off was a small slot so icould use that area kinda like a slotted enclosure would... then I made a baffle the size of my hatch area and cut a 12" hole in it for my sub and carpeted it... with a normal 12" enclosure it sounded good, a normal 12" slotted sound a little better, but this way hits pretty damn hard... and I am proud of myself for it...

no engine work yet... just a stock LS w/gsr tranny...

thanks for the comments...

 

oh yea I did do a complete power conversion PDL/PW/PM... took me 2 nights... and the prelude seats took 1 afternoon...

 

Wow props on the power conversion... I have power mirrors in mine, not hooked up, I'm scared to try and attempt that cuz I don't even know where to start and wiring isn't one of my favorite things to do... :nervous:

 

Nice pix, i kinda like the wheels!



It better be fiberglass enclosed or that board is gonna be flyin everywhere!

i'll be doing something similar to a car in a few weeks, i'll do a quick write-up / DIY for ya.

 

Do you drive with your seals layed back like that? I would go nuts sitting that far back lol

 

I think that day I slid the seats all the way back... and the gangsta lean is not an everyday thing... if someone tries me or I'm feeling lazy I put it up... the rims came with the car, but the back rim has 1 lug lock on it that my friend couldn't find, so when I go to change the tire or rims I have to find a way to remove it, any ideas? maybe ill take it to a tire place and pay them to do it, but I'd rather do it myself so I know how... ill take pix of what my sub looks like under...