PHieTNaM's EG6 Updated pics
 

Here are SOME pix of my Hatch

http://img238.imageshack.us/img238/2...seatjx8.th.jpghttp://img181.imageshack.us/img181/2...ats1cn0.th.jpghttp://img329.imageshack.us/img329/7...ats2oi2.th.jpghttp://img164.imageshack.us/img164/7...eat3kk0.th.jpg
http://img183.imageshack.us/img183/3...iew1lk0.th.jpghttp://img143.imageshack.us/img143/3...iew2tp9.th.jpghttp://img294.imageshack.us/img294/6...iew3hz7.th.jpg

I'm diggin' the old school rims. Any engine work?

What does it look like under the sub? I'm still wanting to do that project. I have a 1000 watt sub and the amp, but have yet to do it. Is that a piece of plywood and you just let it hang? I'm thinking fiberglass enclosure.
Power window swap?? I did that to mine too.

Clean :D

damn i luv those little cars lol
i wanna get one. looks smooth thought.:)

my sub is made into my spare tire space, I used 2x2 and made a frame then glued it down around the spare tire space with liquid nail... let it cure for 24 hrs. then filled the gaps with expanding foam (dries in 4 hours), the only place I didn't seal off was a small slot so icould use that area kinda like a slotted enclosure would... then I made a baffle the size of my hatch area and cut a 12" hole in it for my sub and carpeted it... with a normal 12" enclosure it sounded good, a normal 12" slotted sound a little better, but this way hits pretty damn hard... and I am proud of myself for it...

no engine work yet... just a stock LS w/gsr tranny...

thanks for the comments...

oh yea I did do a complete power conversion PDL/PW/PM... took me 2 nights... and the prelude seats took 1 afternoon...

Wow props on the power conversion... I have power mirrors in mine, not hooked up, I'm scared to try and attempt that cuz I don't even know where to start and wiring isn't one of my favorite things to do... :nervous:

Nice pix, i kinda like the wheels!



It better be fiberglass enclosed or that board is gonna be flyin everywhere!

i'll be doing something similar to a car in a few weeks, i'll do a quick write-up / DIY for ya.

Do you drive with your seals layed back like that? I would go nuts sitting that far back lol

I think that day I slid the seats all the way back... and the gangsta lean is not an everyday thing... if someone tries me or I'm feeling lazy I put it up... the rims came with the car, but the back rim has 1 lug lock on it that my friend couldn't find, so when I go to change the tire or rims I have to find a way to remove it, any ideas? maybe ill take it to a tire place and pay them to do it, but I'd rather do it myself so I know how... ill take pix of what my sub looks like under...