need to replace cv boot
Rotorphile.
Joined: Mar 2002
Posts: 10,120
Likes: 0
From: Richmond, VA
You don't even need a pickle fork or puller. Wack the side of the LCA where the ball joint bolts down, it will pop out. Pickle forks will often split the boot, make a mess and ruin the ball joint.
warm butter on toast
Joined: Jan 2005
Posts: 6,485
Likes: 0
From: The boonies, CT
Originally Posted by Kai
You don't even need a pickle fork or puller. Wack the side of the LCA where the ball joint bolts down, it will pop out. Pickle forks will often split the boot, make a mess and ruin the ball joint.
Rotorphile.
Joined: Mar 2002
Posts: 10,120
Likes: 0
From: Richmond, VA
Originally Posted by Omniscient
After the 1st time I do exactly that, but after 10 years of newengland salt, sand, and rust gets in there...it's hell without one.
Originally Posted by darkskyracing
kragen sells a really easy one that is pre split comes with the grease, screws , and clamps. and it only takes about 30 min to do the job