*EG8 ENGINE SWAP* ANY and ALL help is appreciated!!!
So I recently sent a rod thru the block on my manual D15B7
Scored a automatic D16Z6 with the trans for dirt cheap (Won’t be needing trans since the car already has a manual one)
I know I might be able to bolt up the Z6 motor to the B7 transmission but I didn’t wanna go out on a limb and be screwed after the car is in the air…
So I guess my question(s) would be…
Does it bolt up without any fab/modification?
IF NOT, what would be the problems I should expect to run into? & What would possibly need to be changed being the trans is Manual and the Z6 swap was Automatic?
Once again, ANY and ALL help is appreciatly greatly!!! Thank you in advance!
Scored a automatic D16Z6 with the trans for dirt cheap (Won’t be needing trans since the car already has a manual one)
I know I might be able to bolt up the Z6 motor to the B7 transmission but I didn’t wanna go out on a limb and be screwed after the car is in the air…
So I guess my question(s) would be…
Does it bolt up without any fab/modification?
IF NOT, what would be the problems I should expect to run into? & What would possibly need to be changed being the trans is Manual and the Z6 swap was Automatic?
Once again, ANY and ALL help is appreciatly greatly!!! Thank you in advance!
Thread
Thread Starter
Forum
Replies
Last Post
grease_panther
Engine Swaps, Tech & Tuning
5
Jan 28, 2008 02:41 PM
Jorgexx
Integra & 97-01 Integra Type-R
11
Sep 26, 2006 08:36 PM
mark7171
Integra & 97-01 Integra Type-R
2
Oct 1, 2004 01:57 PM



