Just a heads up but streetrace and this site is a bad combo. No streetracing talk allowed.

 

I know this thread is KINDA old...but I have a similar question as well......so I have a 95si hatch w/ b16....for the cv axles would I get them from a b-series car (99-00si/del slow)? or just for the type of car it is?.....never been through this before and its got me wondering


thanks

 

B series axles.

 

so from a del sol or 99-00 si would be ok.....cool..thanks alot......are axles from integras any better/stronger?

 

same.

 

your info= wrong.....the splines on the ends are different b/t integras and the 99-00si ones

 

thats odd since I used 94 integra axles the first time around and 99Si axles the second time around both with the same int. shaft and they worked perfectly fine...

and be more specific with the splines on the end? which end...inner or outer CV...did you actually count the splines or are we going on hearsay? I will still stand by B series axles.

 

hehe... wow. that brings me back to suckyness

 

the splines on the si axles went half way down the shaft on the outer part of the axle....the integra ones apparently go all the way down....I got the si ones..took it to the shop and they said they wont go all the way in because the splines dont go all the way down the outside of the shaft

 

well then maybe I was sold a wrong set of axles labeled as Si but were actually teg ones...I was using the teg intermediate shaft. Sorry for the mis-inform...I will add it to my knowledge base as that is news to me.