civic b16 question.
Joined: Jul 2003
Posts: 28,282
Likes: 0
From: michigan
Originally Posted by nightscr3en
ok just too out my old motor i did have to go buy new axles i got 99 si axles works just fine got some pics so will post them later tonight or this sat, i have a huge problem i can get the rear and right side to mount but im having problems with the passenger mount anyone ran into this problem before? im using the stock mounts.
Thread Starter
Junior Member
Joined: Feb 2006
Posts: 24
Likes: 0
one other question will the rear mount and the driver and trany botomn mount be ok they seem to mount just fine just the passenger wont mount i went to an auto shop they said about 75$ for the top transmission mount is that a good deal?
Zc powered ED9
Joined: Jun 2004
Posts: 900
Likes: 0
From: The 607: Ithaca, NY
Originally Posted by nightscr3en
will my current mounts and axels work on the motor? and is there anything special that i need to get everything setup?
Isn't this something you should have researched and looked into first before getting into a swap?
It amazes me , with how much info is out there now regarding these old swaps , how much actual homework and research is not done before tackling such a thing. Seems like most ppl buy first then ask questions later.
Thread Starter
Junior Member
Joined: Feb 2006
Posts: 24
Likes: 0
well i did do my research but i guess the data that im getting is all wrong but its ok im learning though and just need a but of your guys help and i thank you guys very much sorry if im such a noob at this.
Joined: Jul 2003
Posts: 28,282
Likes: 0
From: michigan
you need B series trans mount, rear mount and trans bracket, Cam side mount...IIRC you can use a couple of your D mounts, but I dont think the ones you are using are those. oh and since it is an automatic, you need a B series auto tranny mount from an automatic integra
Last edited by Civic2Scooby; Feb 17, 2006 at 02:40 PM.
Thread Starter
Junior Member
Joined: Feb 2006
Posts: 24
Likes: 0
ok just got my engine in ^_^ but the bad news is i had a bad distributor so i took out the distributor from my d16 and put it in the b16 works just fine i can get it to start and everything huge problem is when i step on the gas or reverse the car it goes extremly extremly slow like less then 5 mph for like 10 secs lol but when it gets to around 20 it seems ok i replaced oil transmission fluid spark plugs and everything could it be the d16 distributor?
